- Видео 14
- Просмотров 104 332
RetroWorkshop
Великобритания
Добавлен 7 окт 2017
A channel dedicated to the restoration and exploration of old technology.
Videos planned for the coming months:
- Sinclair C5 restoration - a multi-part video series including a full strip down and restoration of this quirky British transportation technology from 1985
- BBC Micro disk drives
- BBC Micro teletext adaptors
- A look at composite video, and examination of a Tektronix PAL waveform monitor
Videos planned for the coming months:
- Sinclair C5 restoration - a multi-part video series including a full strip down and restoration of this quirky British transportation technology from 1985
- BBC Micro disk drives
- BBC Micro teletext adaptors
- A look at composite video, and examination of a Tektronix PAL waveform monitor
Sinclair C5's on the Felixstowe Run 2023 | ft. Gas Turbine C5
18 Sinclair C5s hit the streets of Ipswich on the annual road run to Felixstowe, a route of 13 miles. This year we had a couple of special C5s in attendance - a gas turbine powered C5, and an original Team Lotus (black JPS branded) Sinclair C5 which was used by Elio de Angelis in the pits at Silverstone in 1985.
This annual event is organised by the Ipswich Transport Museum. Entries are open from the New Year, and the Sinclair C5s organise themselves via the "Sinclair C5 Owners" Facebook forum.
Link to Ian's RUclips channel:
www.youtube.com/@iandavidson99/videos
Recorded May 2023.
This annual event is organised by the Ipswich Transport Museum. Entries are open from the New Year, and the Sinclair C5s organise themselves via the "Sinclair C5 Owners" Facebook forum.
Link to Ian's RUclips channel:
www.youtube.com/@iandavidson99/videos
Recorded May 2023.
Просмотров: 1 381
Видео
A dozen Sinclair C5s on the road | Felixstowe Run 2022
Просмотров 1,1 тыс.Год назад
A dozen Sinclair C5s attempt the historic vehicle run from Ipswich to Felixstowe. Recorded May 2022. Thanks to Sam for rounding up the C5 contingent, and to the Ipswich Transport Museum for organising the event. Additional footage by Thomas Peters.
Technics 1210 repair | blowing fuses & target light replacement
Просмотров 14 тыс.2 года назад
In this video I repair a Technics SL1210 turntable. This one was brought to the workshop in a non-working state as it was blowing fuses. The fault was repaired, along with the target light (stylus illuminator) which was also faulty. I replace it with an LED lamp. Recorded March 2021.
JVC CRT monitor repair pt. 2 - film replacement
Просмотров 2,5 тыс.3 года назад
Part 2 of my repair of a JVC CRT monitor. This monitor originally had a film stuck to the CRT tube face which was damaged when I bought it. As the damage was quite distracting, I removed the film. However, this left the tube face looking rather grey. In this follow up video, I try out two replacement films and restore the picture back to its original state. CAUTION: Do not disassemble mains pow...
Sinclair C5 | Retro Commute
Просмотров 21 тыс.3 года назад
In an update to my original Sinclair C5 series, I make a few tweaks to this fine machine, and attempt to commute 8 miles to work. Chapters 00:00 Intro 01:01 Front brake blocks 01:46 Disaster strikes - loss of power 02:07 Locating the electrical fault 04:32 Red pod connectors 05:16 Correction: Pod Mods 06:12 Fitting a horn 08:51 Commuting to work 11:50 On the road 16:15 Starship Robots 16:49 Fin...
Sinclair ZX Spectrum 48k | Charity Repair and Refurb
Просмотров 12 тыс.3 года назад
In this video I refurbish a Spectrum 48K computer that was found in my neighbours loft. I ran some tests using a diagnostic ROM and I found a memory fault, which I repaired along the way. I'm selling this Spectrum on eBay (as December 2020) in aid of a charity. Chapters 0:00 Intro and machine condition 1:48 Pre-power checks 4:49 Powering up and memory test 5:50 DC to DC convertor 7:29 ULA heats...
JVC CRT Monitor | Scratched screen repair and review
Просмотров 6 тыс.4 года назад
In this video I take a look at a JVC DT-V1710CG video monitor which I bought for use with my retro computer collection. This was one of the last broadcast standard CRT monitors produced, and I had high hopes for the picture quality. However, it arrived in a scruffy condition with scratches on the screen and damage to the anti-reflective coating. I tear down the monitor, repair the damage to the...
Sinclair C5 Restoration - Part 2 - Tear Down (v2)
Просмотров 6 тыс.4 года назад
In this video I strip the Sinclair C5 electric vehicle down to the chassis in order to assess its condition. I also spot some other problems, and discover the source of the wonky wheel noted in the last video. When I recorded this video, I had not taken this C5 apart before. Some parts were in the wrong place, and these have been shown with captions. These captions were added and the video re-u...
"The Apprentice" Telephone | Jacob Jensen T3
Просмотров 3,1 тыс.4 года назад
In this video I take apart and repair a device made famous by the BBC's "The Apprentice" programme. It's a classic from the highly respected Danish designer, Jacob Jensen, who won numerous awards for his work. He is especially well known for his designs for Bang and Olufsen. Since recording, I noticed that the ringer in the TV programme has a different cadence. I suspect the phone was hanging o...
Retro Radio Mic | Micron TX503
Просмотров 1,9 тыс.5 лет назад
In this video I explore a classic radio mic system, recognisable to anyone who watched TV in Britain in the 80's and 90's. I managed to acquire the handheld Micron TX503, the pocket TX501 and the diversity receiver rack. The equipment gets a clean up and some minor fixes, and is put through its paces. Along we way we look at UK radio mic frequencies and diversity microphone systems are explaine...
Sinclair Spectrum 48k - Double Restoration | Original Spectrum and Spectrum Plus
Просмотров 8 тыс.5 лет назад
Two eBay purchases - both bought as "untested". I wanted to find out what the difference was between the original Spectrum 48k, and the later Spectrum Plus. Both machines are repaired and restored, and checked out using the Retroleum SMART card and diagnostic ROM. I then put the keyboards through their paces to check out the improvements made to the Spectrum Plus. To accompany the video and ref...
Sinclair C5 Restoration - Part 4 - Electrics
Просмотров 7 тыс.5 лет назад
The final video in this series is dedicated to the vehicle electrics. We take a look over the electrical system, fit a safety wiring loom, service the motor and make some reliability modifications to the pod. Errors and Corrections: - Catch Diodes: I think it is intended to add diodes to IC pin 4 only. Not pins 1 and 4 as shown in the video. - When I discuss the diode damage caused by pushing t...
Sinclair C5 Restoration - Part 3 - Rebuild
Просмотров 8 тыс.5 лет назад
In this video we clean up the C5 and inspect the chassis which has come back from the powder coater's. We put it back together, and replace the worn out mechanical parts (brakes, tyres etc) along the way. In order to research this video I used the following, all of which I'd recommend: - Sinclair Owners Manual (contains exploded diagram and parts list): www.c5owners.com/sinclair-c5-resources-an...
Sinclair C5 Restoration - Part 1
Просмотров 13 тыс.6 лет назад
In this video I look at how to go about buying a C5, give it a basic check over, and take it out for a test ride. Please get in touch with any comments or suggestions - your help restoring the C5 is needed! Add comments below, contact me on twitter @retroworkshop or I'm often lurking in the Facebook group. Information about each video will feature on the website at www.retroworkshop.uk and I'll...
I would love to replicate that board showing the electrics working, Any chance of a detailed video showing how you made and wired it? or a link to how to build it? Thanks!
Hello - could you please add a link to the correct tool to undo the pedals @ 8:12. Thank you. Great Video
It is a Cotterless Crank Removal Tool. Can’t remember where I got mine try Halfords or Amazon.
@@RetroWorkshop I think it's a standard mountain Bike crank removal tool. Thanks for the Video's.
Seu vídeo é maravilhoso aprendo bastante com a tecnica de linpar e restaurar...sucesso..
ruclips.net/video/YTWAD3DDLSQ/видео.html.......Dica Brasil
Well done!
I want that Donna Summer 12" 🙂
I now realise this is a famous remix. Great track.
Well done indeed. Donna Summer at the end, icing on the cake!
When I first visited Britain in 1985 I saw lots of these around London. I thought they were the most futuristic looking vehicles.
cool.
Very cool!
Now every time I see a C5 I can't stop remembering the end of Micro Men.
With the Jean Michel Jarre soundtrack, being overtaken by the juggernauts. 😉
Thanks for the video! Picked up a pretty worn cpd-200sf so I'll give this a shot
Anyone know if there are any alternatives to restore the anti-static properties of the original film aswell?
Great video many thanks. May I ask where you got the Sinclair vehicles sign from ? If it was specially made could you let me the details of the sign maker you used as they may still have the graphics to produce another many thanks
If you email me via my website I will send you the logo. Any printer that can print on Foamex board can print it. The foamex was cut to size by the printer then I velcro’d it onto two battons that are screwed to the wall.
Hi. Great video thanks. May I ask where you got the Sinclair vehicles sign from. If you had it specially made do you have a link the the sign maker many thanks.
A third choice is to buy a pico zx board and install in the speccy case, with a small modification to allow for the vga out.
Love the lotus c5 also my dad and 2 others helped restore ayrton sennas c5 don't know what happened to it but it was the real one
Great fun vid, any idea where the fuel tank was on the C5 turbine and how much fuel it held?
No idea I'm afraid!
Great to see about all the C5s, we did a video on the event at the prom and featured them all parked up in that delta formation, huge turnout. Great to see the more Sinclair stuff from. The past, I started out my computing life on a ZX80....
I saw a C5 on the road in Tewkesbury last week. I hadn’t seen one for nearly 40 years, and one appears in my home town.
Running a red at 3:20 🚸?!
At least 4 of them ran a red there, and the last of the group was lucky not to have hit the lady crossing the road ! Poor show :(
Fantastic stuff! That gas turbine is nuts! A brave man sits right on top of a motor doing 100k rpm 😆
160k rpm 😊
Gas turbine C5 sounds awesome when it’s not moving .
I would love to see a build video on the turbine c5
I don't think there is a build video, but Ian has some videos of the machine on his RUclips channel www.youtube.com/@iandavidson99/videos
@@RetroWorkshop yeah I looked
@@RetroWorkshop I would love e to retro mod a c5
@retroworkshop Very good video! I have exactly the same issue. Found a DT-V1910CG but the seller damaged the coating when he tried to clean it before the sale… I like the tint you have ended up with. Looks pretty good to Me. Could You please tell Me which exactly tint You used it. I guess the original coating of the DT-Vs is always the same, so whatever tint you used should be good for Mine too. At least that’s my guess :) Also do You have by any chance the dimensions (is yours a 19“?) I would like to get pre cut tints
Hello, I have a 17 inch model. In this video I fitted 50pc light smoke tint from window-tint.co.uk/ Since I made this video, I have replaced film on other monitors and instead used the "carbon" variant from this same site. This is a close match and doesn't have the slightly off white light transfer (ever so slightly yellow). This film is much thinner and easy to damage. But then the original film is easy enough to damage.
Thanks for your quick reply mate. So you would recommend the carbon variant (also with 50% )?
Yes I compared them and the carbon is better (more neutral and matches the original better). Thanks, Dave.
This process can be very fiddly. Some monitors you get it right first time, others it takes five goes to get it right without little air bubbles or imperfections. Buy lots of extra film! :)
Thanks a lot. You are a great help! Yeah as I know Myself, I will buy a lot of extra :D just to be safe
Very nice 👍
my 1210 get wet cus flooding. how to repair it?
Start by drying it out.
Very nice turned out lovely! Great work with the Restoration series!
Thank you very much!
Ellerine sağlık kardeşim 😊😊😊
Great job 👍
Excellent work.
Hello, could you give me a purchase link for this DC DC converter, where did you buy it or on Aliexpress that is economical? I also wanted to know where to buy a DC power input connector for a zx spectrum 48k. Thank you
Hello, Retroleum.co.uk is where I bought the DC to DC convertor (it is their MuRata Switch Mode 5v Regulator (replaces 7805)). They also sell the DC connector you want (Replacement 2.1mm DC Power Socket).
@@RetroWorkshop Thank you!, I also need a low dram 4116 memory for the IC13 bank, do you know where I can buy it that is economically cheap.
great job ... I wonder where can I order the light led ... I hope it's not big diference than the original light since my other mk2 still have the original light. it will look weird on my setup
Ebay. No idea how well it will match the original in terms of brightness, or colour temperature. You could of course buy two, and replace both so they match.
Great!!! Thanx
Just bought a c5 and will be watching your videos for help. Subscribed
Great stuff. Don’t forget to join the Sinclair C5 Owners group if you are on Facebook.
I know this is a few years old, but hint for cleaning up anything with gaffa marks, or sticky residue is eucalyptus oil. It cuts through so many of these things.
Great tip!
I could see this being a great project for a donor electric bike.
Interesting
"Morning, Sir Clive!" had me in stitches. :)
This is well explained and come in handy for when I start on my C5 that my neighbour is giving me. 🤔
Good luck with your C5 restoration!
@@RetroWorkshop thanks, interested in a throttle for the motor instead of the on/off switch.
Can’t help with that I’m afraid. You’d need a controller of some little circuit to covert an analogue throttle to on on/ off relay.
I bought a regular trinitron monitor, any idea if they have a screen protector that can be removed as well?
Depends on the model. Probably not for a domestic tv. Some high end BVM monitors had em too. Some pc monitors have a coating on the glass which if cleaned or scratched, you can remove the coating with alcohol to leave the normal glass. If the glass itself is scratched nothing you can do.
First Time i see your video, I love it ! , you speak very well and this is very easy to Heard (i'm french :) ) ,it's also very interesting !, i have 3 1200s at home! , your explications when you were open the deck was very interesting too! Keep making perfect videos like that !!!! Have a great day :)
Thank you! I’m currently looking for a record deck. Trying to persuade myself to pay the extra and get a Technics over a cheapo AT!
@@RetroWorkshop mk2 on top! or mk7 is pretty good too
Hello, I have a technics sl1300 and all is well expect it doesn't turn, everything else seem to work. Any advice ?
One of the main things a record player does is turn, so all is very much not well I’m afraid.
Brilliant thankyou
subbed .. great video 🤓
Maybe stack together a large pack of Lithium Polymer batteries used for RC airplanes etc... and you might be able to double or even triple your mileage...
I’ve recently bought a 35AH LiFePo battery and it does about 16 miles and weighs next to nothing. A bit pricey, mind you.
@@RetroWorkshop If it weighs next to nothing, maybe you could put 2 of them in the C5 ? 32 miles would be awesome :)
I love this microphone. Here in Brazil, the Globo TV use it a lot ... in the 80s and begining of th e 90s
Yes I have seen this mic is famous in Brazil!
The C5 - 40 years ahead of the game! Did you notice the pedestrian at 10:50 - "'Morning, Sir Clive!"
Hello and thank you so much for your series on this, watched both videos and they are amazing, subscribed! I wondered if you could help me make a decision.... My monitor came with the antireflective coating removed from the film, and I like the brightness just as it is, but I know you removed your film with the antireflective coating. My question - if I were to remove the film, would it now be lighter still? Or did the darkness come from the antireflective coating and not also the film? Thank you for any advice here as I am wondering what to do next and if I need the tint stage.
The antireflective coating does not contribute to the darkness. It is the film itself that has the tint. If your film isn’t damaged leave it on.
@@RetroWorkshop thanks very much for getting back to me at this time unless we are both up too late haha! I do have a few chips and a scuff but they are all in the corners, so I think I will live with it after your advice, BUT if I change my mind I have these 2 vids favourited :)
The front wheel drive with disc brake looked interesting
Disc brakes do give much better performance. I’ve now got one on the back wheel.
Good video, very informative!!!👍🏾💯